Supero SUPERSERVER 6027R-73DARF, User Manual

Page: 56 / 106

5-26
S
UPER
S
ERVER 6027R-73DARF User's Manual
5-11 SATA and SAS Ports
SAS Port
Pin Defi nitions
Pin# Defi nition Pin Defi nition
1 Ground 2 TXP
3 TXN 4 Ground
5 RXN 6 RXP
7 Ground
SATA Port
Pin Defi nitions
Pin# Defi nition Pin Defi nition
1 Ground 2 TXP
3 TXN 4 Ground
5 RXN 6 RXP
7 Ground
Serial ATA Ports
There are six Serial ATA Ports (I-
SATA0~I-SATA 5) located on the
serverboard, including four SATA2
ports and two SATA3 ports. These
ports provide serial-link signal con-
nections, which are faster than Paral-
lel ATA. See the table on the right for
pin defi nitions.
SAS Ports
Eight Serial Attached SCSI ports
(SAS 0~3, 4~7) provide serial link
connections. These ports are sup-
ported by an LSI 2208 ccontroller.
See the table on the right for pin
defi nitions.
Unit Identifi cation Switch/LED
A Unit Identifi er switch (UID) and a
rear UID LED indicator (LED3) are
located next to LAN ports on the back
of the chassis. When the user pushes
the rear UID switch, the rear UID LED
(LED3) will be turned on. Push the UID
switch again to turn off the LED indi-
cator. The UID switch provides easy
identifi cation of a system unit that may
be in need of service. See the tables
on the right for more information.
UID LED
Status
Color/State OS Status
Blue: On Windows OS Unit Identifi ed
Blue:
Blinking Linux OS Unit Identifi ed