Supero SUPERSERVER 6027R-73DARF, User Manual

Page: 10 / 106

1-2
S
UPER
S
ERVER 6027R-73DARF User's Manual
1-2 Serverboard Features
The SuperServer 6027R-73DARF is built around the X9DRD-7LN4F, a dual proces-
sor serverboard based on the Intel C602J chipset and designed to provide maximum
performance. Below are the main features of the X9DRD-7LN4F. (See Figure 1-1
for a block diagram of the chipset).
Processors
The X9DRD-7LN4F supports single or dual Intel® Xeon E5-2600 Series processors
in LGA 2011 sockets (Socket R). Please refer to the serverboard description pages
on our web site for a complete listing of supported processors (www.supermicro.
com).
Memory
The X9DRD-7LN4F has 16 DIMM slots that can support up to 512 GB of RDIMM,
ECC LRDIMM or ECC/non-ECC UDIMM DDR3-1600/1333/1066/800 type memory.
See Chapter 5 for details.
SAS
A total of eight SAS 2.0 ports are provided with an LSI 2308 SAS controller. RAID
levels 0, 1, and 10 are supported.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SAS drives.
Serial ATA
A SATA controller is also integrated into the chipset to provide two SATA 3.0 (6/
Gbps) and four SATA 2.0 (3 Gbps) ports, which are RAID 0, 1, 5 and 10 supported.
The SATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.
PCI Expansion Slots
The X9DRD-7LN4F has six PCI-E 3.0 x8 slots and four PCI-E 3.0 x8 slots. PCI
slots are controlled by CPUs: both CPUs must be installed to utilize all slots. See
Chapter 5 for details.