Supero SUPERSERVER 6027R-73DARF, User Manual

Page: 11 / 106

1-3
Chapter 1: Introduction
Rear I/O Ports
The color-coded I/O ports include one COM port, a VGA port, four USB 2.0 ports
(additional USB headers are included on the serverboard) and four 1 Gb Ethernet
ports. A dedicated IPMI LAN port is also included.
1-3 Server Chassis Features
The SC825TQ-R740LPB is an ATX form factor chassis designed to be used in a
2U rackmount confi guration. The following is a general outline of the main features
of the SC825TQ-R740LPB server chassis.
System Power
The SC825TQ-R740LPB features a redundant 740W power supply composed of
two separate power modules. This power redundancy feature allows you to replace
a failed power supply module without shutting down the system.
Hard Drive Subsystem
The SC825TQ-R740LPB chassis was designed to support eight hot-swap SATA
or SAS hard drives.
Front Control Panel
The control panel on the SC825TQ-R740LPB provides you with system monitoring
and control. LEDs indicate system power, HDD activity, network activity, system
information and power supply failure. A main power button and a system reset but-
ton are also included. As an option, two USB ports may be incorporated into the
control panel to provide front side USB access.
Cooling System
The SC825TQ-R740LPB chassis has an innovative cooling design that includes
three 8-cm hot-plug system cooling fans located in the middle section of the chas-
sis. The power supply module also includes a cooling fan.