Supero SUPERSERVER 6027R-73DARF, User Manual

Page: 46 / 106

5-16
S
UPER
S
ERVER 6027R-73DARF User's Manual
Reset Button
The Reset Button connection is
located on pins 3 and 4 of JF1 and
attaches to the reset switch on the
computer chassis. See p. 5-4 and the
table on the right for pin defi nitions.
Power Button
The Power On connection is on pins
1 and 2 of JF1. These should be con-
nected to the chassis power button.
See p. 5-4 and the table on the right
for pin defi nitions.
5-8 Connector Defi nitions
ATX Power 24-pin Connector
Pin Defi nitions
Pin# Defi nition Pin # Defi nition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Reset Button
Pin Defi nitions (JF1)
Pin# Defi nition
3 Reset
4 Ground
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 Power Signal
2 Ground
Secondary Power Connector
JPW2, JPW3 and JPW4 must also
be connected to the power supply.
See the tables on the right for pin
defi nitions.
+12V 8-pin Power Connector
Pin Defi nitions
Pins Defi nition
1 - 4 Ground
5 - 8 +12V
Warning : To provide adequate power
supply to the serverboard, be sure
to connect all four power connectors
to the power supply. Failure to do so
will void the manufacturer warranty on
your power supply and serverboard.
Power Connectors
A 24-pin main power supply connector
(JPW1), two 8-pin CPU power con-
nectors (JPW2/3) and a 4-pin power
connector (JPW4) must be connected
to the power supply. These power
connectors meet the SSI EPS 12V
specifi cation. See the table on the
right for pin defi nitions.
NC = No Connection
+12V 4-pin Power Connector
Pin Defi nitions
Pins Defi nition
1~2 Ground
3~4 +12V