Supero SuperServer 6027PR-HC1FR, User Manual

Page: 113 / 138

Chapter 7: BIOS
7-17
Port 0 ~ Port 5 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a
COMRESET initialization sequence to the device. The options are Enabled and
Disabled .
Port 0~5 Staggered Spin Up
Select Enabled to enable Staggered Spin-up support to prevent excessive
power consumption caused by multiple HDDs spinning-up simultaneously.
The options are Enabled and
Disabled .
RAID Mode
The following items are displayed when RAID Mode is selected:
PCH RAID CodeBase
Select Intel.to configure RAID settings using the Intel PCH controller. Select
LSI to configure RAID settings using the LSI controller. The options are
Intel
and LSI.
SATA RAID Option ROM/UEFI Driver (Available if the item above -
SATA Mode Select is set to AHCI or RAID)
Select Enabled to use the SATA RAID Option ROM/UEFI driver for system
boot. The options are
Enabled and Disabled.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The options
are
Enabled
and Disabled.

SCU (System Configuration Unit) Configuration
Storage Control Unit
Select Enabled to support Intel PCH devices. The options are Disabled and
Enabled
.
SATA RAID Option ROM/UEFI Driver
Select Enabled to use the SATA RAID Option ROM/UEFI driver for system boot.
The options are
Enabled and Disabled.
SCU Devices
Select Enabled to enable support for PCH SCU (System Configuration Utility)
devices. The options are Disabled and
Enabled
.