Supero SUPERSERVER 6027AX-72RF, User Manual

Page: 65 / 126

Chapter 5: Advanced Serverboard Setup
5-19
Ethernet Ports
Two Ethernet ports are located on the
I/O backplane. A dedicated IPMI LAN
port is also included to provide KVM
support for IPMI 2.0. These ports ac-
cept RJ45 type cables.
Universal Serial Bus (USB)
Four Universal Serial Bus 2.0 ports
(USB 2.0 Ports 0~3), and two USB 3.0
Ports (USB 3.0 Ports 0/1) are located
on the I/O backplane. In addition, two
USB 2.0 ports (USB 5/6), and a Type
A USB connector (USB4), located
close to the Intel PCH chip, provides
front USB access. Also, two USB 3.0
ports (USB 3.0 Ports 2/3) are located
next to Fan 3 to provide front access.
USB Cables are not included. See the
tables on the right for pin definitions.
LAN Ports
Pin Definition
Pin# Definition
1 P2V5SB 10 SGND
2 TD0+ 11 Act LED
3 TD0- 12 P3V3SB
4 TD1+ 13 Link 100 LED (Yel-
low, +3V3SB)
5 TD1- 14 Link 1000 LED
(Yellow, +3V3SB)
6 TD2+ 15 Ground
7 TD2- 16 Ground
8 TD3+ 17 Ground
9 TD3- 18 Ground
Back Panel USB (2.0) #0~3
Pin Definitions
Pin# Definition Pin# Definition
1 +5V 5 +5V
2 USB_PN1 6 USB_PN0
3 USB_PP1 7 USB_PP0
4 Ground 8 Ground
Front Panel USB (2.0) #4, 5/6
Pin Definitions
USB 5
Pin # Definition
USB 4/6
Pin # Definition
1 +5V 2 +5V
3 USB_PN2 4 USB_PN3
5 USB_PP2 6 USB_PP3
7 Ground 8 Ground
9 Key 10 Ground
Back Panel USB (3.0) #0/1, Front Accessible USB (3.0)
#2/3
Pin Definitions
Pin# Pin# Signal Name Description
1 10 VBUS Power
2 11 D- USB 2.0 Differential Pair
3 12 D+
4 13 Ground Ground of PWR Return
5 14 StdA_SSRX- SuperSpeed Receiver
6 15 St Differential Pair
7 16 GND_DRAIN Ground for Signal Return
8 17 StdA_SSTX- SuperSpeed Transmitter
9 18 St Differential Pair