Supero SUPERSERVER 6027AX-72RF, User Manual

Page: 21 / 126

Chapter 2: Server Installation
2-7
screw the handles the
outer rails for secure
purpose if necessary
F.
ABLECOM
DATE:2008/08/14
REV:2
SCREW
SCREW
COMPLETE
1
2
Figure 2-3. Installing the Rack Rails
Installing the Chassis into a Rack
1. Extend the outer rails as illustrated above.
2. Align the inner rails of the chassis with the outer rails on the rack.
3. Slide the inner rails into the outer rails, keeping the pressure even on both
sides. When the chassis has been pushed completely into the rack, it should
click into the locked position.
4. Optional screws may be used to secure the to hold the front of the chassis to
the rack.
Note that the figure above is for illustration purposes only. Always install servers to
the bottom of the rack first.
Warning:
do not pick up the server with the front handles. They are de-
signed to pull the system from a rack only.