Supero SUPERSERVER 6027AX-72RF, User Manual

Page: 79 / 126

6-2
S
UPER
S
ERVER 6027AX-TRF/6027AX-72RF User's Manual
Figure 6-1. Chassis: Front View
6-2 Control Panel
The control panel (located on the front of the chassis) must be connected to the JF1
connector on the serverboard to provide you with system status indications. These
wires have been bundled together as a ribbon cable to simplify the connection.
Connect the cable from JF1 on the serverboard to the appropriate header on the
Control Panel PCB (printed circuit board). Make sure the red wire plugs into pin 1
on both connectors.
Pull all excess cabling out of the airflow path.
The control panel LEDs inform you of system status. See "Chapter 3: System In-
terface" for details on the LEDs and the control panel buttons. Details on JF1 can
be found in "Chapter 5: Advanced Serverboard Setup."
LCD Screen Control Panel
Hard Drive Bays (10)
6027AX-72RF Drive Configuration
SAS2 SAS5
SAS1 SAS4 SAS7 SATA1
SAS0 SAS3 SAS6 SATA0
6027AX-TRF Drive Configuration
SATA2 (ISATA2) SATA5 (SSATA1)
SATA1 (ISATA1) SATA4 (SSATA0) SAS7 (SSATA3) SATA10 (ISATA5)
SATA0 (ISATA0) SATA3 (ISATA3) SAS6 (SSATA2) SATA9 (ISATA4)