Supero SUPERSERVER 6026T-3RF, User Manual

Page: 45 / 100

Chapter 5: Advanced Serverboard Setup
5-13
X8DT3-F Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear See Section 5-10
JI 2 C1/JI 2 C2 SMB to PCI Slots Pins 2-3 (Disabled)
JPB BMC Enable/Disable Pins 1-2 (Disabled)
JPG1 VGA Enable/Disable Pins 1-2 (Reset)
JPL1/JPL2 JLAN1/2 Enable/Disable Pins 1-2 (Enabled)
JPT1 TPM Support Enable/Disable Pins 1-2 (Enable)
JPS1 SAS RAID Enable/Disable Pins 1-2 (Enabled)
JPS2 SAS RAID Select Closed (SR RAID)
JWD Watch Dog Pins 1-2 (Reset)
Connector Description
COM1/COM2 COM1/COM2 Serial Port/Header
FAN 1-8 System/CPU Fan Headers (Fans 7~8: CPU Fans)
Floppy Floppy Disk Drive Connector
I-SATA0 ~ I-SATA5 (Intel South Bridge) SATA Ports
J5 IPMB I 2 C Connector (for IPMI Card)
J6 Power Supply SMBus I
2
C Header
JD1 PWR LED/Speaker Header
JF1 Front Panel Connector
JL1 Chassis Intrusion Header
JOH1 Overheat LED Header
JPW1/JPW2 8-pin 12V Power Connectors (Secondary Power)
JPW3 24-pin ATX Power Connectors (Main Power)
JWOL Wake-On-LAN Header
JLAN1 LAN1 and LAN3 Ports
JLAN2 LAN2 and LAN4 Ports
SAS0~3, SAS4~7 SAS Ports
T-SGPIO-1/T-SGPIO-2 Serial General Purpose Input/Output Headers
USB0/1 Back Panel Universal Serial Bus (USB2.0) Ports
USB2, USB3 Type A USB2.0 Ports
USB4/5, USB6/7 USB2.0 Headers
LED Description
D1 BMC Heartbeat LED Indicator
LE1 Onboard Standby Power LED Indicator
LES1/LES2 SAS LEDs (LES1: SAS Heartbeat, LES2: SAS Activity)