Supero SUPERSERVER 6026T-3RF, User Manual

Page: 46 / 100

5-14
S
UPER
S
ERVER 6026T-3RF User's Manual
Reset Button
The Reset Button connection is
located on pins 3 and 4 of JF1 and
attaches to the reset switch on the
computer chassis. See the table on
the right for pin defi nitions.
Power Button
The Power On connection is on pins
1 and 2 of JF1. These should be
connected to the chassis power but-
ton. See the table on the right for pin
defi nitions.
5-9 Connector Defi nitions
Required Connection
ATX Power 24-pin Connector
Pin Defi nitions (JPW3)
Pin# Defi nition Pin # Defi nition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Reset Button
Pin Defi nitions (JF1)
Pin# Defi nition
3 Reset
4 Ground
Power Button
Pin Defi nitions (JF1)
Pin# Defi nition
1 Power Signal
2 Ground
Secondary Power Connector
JPW1 must also be connected to the
power supply. See the table on the
right for pin defi nitions.
Main ATX Power Supply
Connector
The primary power supply connec-
tor (JPW3) meets the SSI EPS 12V
specifi cation. Refer to the table on the
right for the pin defi nitions of the ATX
24-pin power connector. You must
also connect the 8-pin (JPW3/JPW4)
processor power connectors to your
power supply (see below).
Required Connection
+12V 8-pin Power
Pin Defi nitions (JPW2)
Pins Defi nition
1 - 4 Ground
5 - 8 +12V
+12V 8-pin Power
Pin Defi nitions (JPW1)
Pins Defi nition
1 - 4 Ground
5 - 8 +12V
Secondary Power Connector
JPW2 must also be connected to the
power supply. See the table on the
right for pin defi nitions.