Supero SuperServer 6024H-8R, User Manual

Page: 62 / 124

6-4
S
UPER
S
ERVER 6024H-8R/6024H-i Manual
Figure 6-2. System Cooling Fans
6-4 Drive Bay Installation/Removal
Accessing the Drive Bays
SCSI Drives (6024H-8R only): You do not need to access the inside of
the chassis or remove power to replace or swap SCSI drives. Proceed
to the next step for instructions. Note: You must use standard 1" high,
80-pin SCA SCSI drives in the SuperServer 6024H-8R.
IDE Drives (6024H-i only): You must power down the system and remove
the top chassis cover to replace IDE drives. Proceed to the "IDE Drive
Installation" section later in this chapter for instructions.
CD-ROM/Floppy Disk Drive: For installing/removing the CD-ROM or floppy
disk drive, you will need to gain access to the inside of the server by
removing the top cover of the chassis. Proceed to the "CD-ROM and
Floppy Drive Installation" section later in this chapter for instructions.
5.25" Drive Bay: For installing/removing a component in the 5.25" drive
bay, proceed to the "5.25" Drive Bay Installation" section later in this
chapter for instructions.
Top Chassis
Cover (removed)
Motherboard
Cover Release Buttons
System Cooling Fans
Power Supply
System Memory