Supero SuperServer 6024H-8R, User Manual

Page: 41 / 124

Chapter 5: Advanced Serverboard Setup
5-7
Figure 5-5. Top View of DIMM Slot
Figure 5-4. Side View of DIMM Installation into Slot
To Install: Insert module vertically and press down until it snaps into
place. Pay attention to the bottom notches.
To Remove: Use your thumbs to gently push each release tab
outward to free the module from the slot.
Memory Support
The X6DH8-G/X6DHE-G has eight 184-pin DIMM slots that can support up to
16 GB of registered ECC DDR333 or up to 32 GB of registered ECC DDR226
SDRAM. The memory is an interleaved configuration, which requires mod-
ules of the same size and speed to be installed in pairs. You should not mix
modules of different sizes and/or speeds.
Note: if ECC registered DDR333 (PC2700) memory modules are used, con-
figurations of four double-banked DIMMs or six single-banked DIMMs are
supported.