Supero SUPERSERVER 6023P-8, User Manual

Page: 54 / 104

5-20
S
UPERSERVER 6023P-8R/6023P-8 User’s Manual
Thermal Fan Enable/Disable
JP38 allows you to enable or disable
the thermal fan. When enabled, the
fan will operate continuously. When
disabled, it will operate only when a
predefined temperature threshold
has been exceeded. See the table
on the right for jumper settings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
D isa b le d
E n a b le d
T h e rm a l F a n
E n a b le /D is a b le
J u m p e r S e tting s (J P 3 8 )
SCSI Termination Enable/
Disable
Jumpers JPA1 and JPA2 allow you
to enable or disable termination for
t h e i n d i v i d u a l S C S I c h a n n e l s .
Jumper JPA1 controls SCSI channel
A and JPA2 controls SCSI channel
B. The normal (default) setting is
open to enable (teminate) both SCSI
channels. If you wish to connect
external SCSI devices, you should
d i s a b l e t e r m i n a t i o n f o r t h e
channnel(s) you will be connecting
them to. See the table on the right
for jumper settings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
E n a b le d
D isa b le d
S C S I C h a n n e l T e rm in a tio n
E n a b le /D is a b le
J u m p e r S e tting s
(J P A 1 , J P A 2 )
Watch Dog Enable/Disable
The Watch Dog jumper (located on
JP37) allows you to enableor dis-
able the Watch Dog feature. The
default position is open to disable
the Watch Dog timer. When en-
abled, Watch Dog can reboot your
PC if an application is "hung up" or
the system goes down. See the
table on the right for jumper set-
tings.
Ju m p e r
P o sitio n
O p e n
C lo se d
D e fin itio n
D isa b le d
E n a b le d
W a tc h D o g T im e r E n a b le /
D is a b le J u m p e r S e ttin g s
(J P 3 7 )