Supero SUPERSERVER 6015B-NT, User Manual

Page: 64 / 126

6-6
S
UPER
S
ERVER 6015B-UR/6015B-U/6015B-NTR/6015B-NT User's Manual
SATA Drive Installation
1. Mounting a SATA drive in a drive carrier
The SATA drives are mounted in drive carriers to simplify their installation and
removal from the chassis. These carriers also help promote proper airfl ow for
the drive bays. For this reason, even empty carriers without drives installed must
remain in the chassis. To add a new drive, install a drive into the carrier with the
printed circuit board side facing down so that the mounting holes align with those
in the carrier. Secure the drive to the carrier with six screws, as shown in Figure
6-4.
Figure 6-4. Mounting a SATA Drive in a Carrier
!
Important: Regardless of how many SATA drives are installed, all
drive carriers must remain in the drive bays to maintain proper
airfl ow.
Use caution when working around the SATA backplane. Do not
touch the backplane with any metal objects and make sure no
ribbon cables touch the backplane or obstruct the holes, which
aid in proper airfl ow.
!