Supero SUPERSERVER 5016I-M6F, User Manual

Page: 45 / 102

Chapter 5: Advanced Motherboard Setup
5-11
Note: For ECC UDIMMs, only Slot 1 and/or Slot 2 may be populated per chan-
nel.
Slot 1, Channel A
Slot 2, Channel A
Slot 1, Channel B
Slot 2, Channel B
DIMM2A
DIMM2B
DIMM2C
DIMM1B
DIMM1A
DDR3 1066/1333 UDIMM/RDIMM required
DIMM1C
Slot 3, Channel A
Slot 3, Channel B
DDR3 ECC RDIMM Memory
DIMM Slots
per Channel DIMMs
Populated
per Channel DIMM Type POR Speeds Ranks per DIMM
(any combination)
3 1 Registered
DDR3 ECC 1066, 1333 Single Rank, Dual
Rank
3 1 Registered
DDR3 ECC 1066 Quad Rank
3 2 Registered
DDR3 ECC 1066, 1333 Single Rank, Dual
Rank
3 2 Registered
DDR3 ECC 800*** Quad Rank
3 3 Registered
DDR3 ECC 800*** Single Rank, Dual
Rank
3 3 N/A Not Supported Quad Rank
5-7 Adding PCI Expansion Cards
The SC813MTS-350C chassis can accommodate one full-size PCI-Express or PCI
expansion card with the use of a riser card.
Installing an Add-on Card
After powering down the system, remove the PCI slot shield. 1.
Fully seat the riser card into the slot, pushing down with your thumbs evenly 2.
on both sides of the card. Seat the expansion card into the riser card.
Finish by using a screw to secure the top of the card shield to the chassis. 3.
The PCI slot shield protects the serverboard and its components from EMI
and aid in proper ventilation, so make sure it is always in place.