Supero SUPERSERVER 5016I-M6F, User Manual

Page: 57 / 102

Chapter 5: Advanced Motherboard Setup
5-23
SAS Enable/Disable
Jumper Settings
Jumper Settings Defi nition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
SAS Enable/Disable
JPS1 allows you to enable or disable
the onboard SAS Connectors. The
default position is on pins 1 and 2 to
enable SAS. See the table on the right
for jumper settings.
5-11 Onboard Indicators
LAN1/2 LEDs
The Ethernet ports (located on the I/O
backplane) have two LEDs. On each
port, one LED indicates activity while
the other LED may be green, amber
or off to indicate the speed of the con-
nection. See the tables on the right for
more information.
LAN1/2 LED
Link LED
LED Color Defi nition
Off No Connection or 10 Mb/s
Green 100 Mb/s
Amber 1 Gb/s
LAN1/LAN2
Activity LED
Color Status Defi nition
Yellow Blinking Active
IPMI Dedicated LAN LEDs
In addition to LAN1/LAN2, a dedicated
IPMI LAN port is also provided on the
X8SI6-F. The yellow LED indicates
activity, while the green LED indicates
the speed of the connection. See the
table at right for more information.
IPMI LAN Link LED (Left) &
Activity LED (Right)
LED Status Defi nition
Link Green: Solid 100 Mb/s
Activity Yellow: Blink-
ing Active
Onboard PWR LED
LED Color Defi nition
Off System Off
On System on, or
System off and PWR
Cable Connected
Onboard Power LED
An Onboard Power LED is located at
LE4 on the motherboard. When LE4 is
on, the AC power cable is connected.
Make sure to disconnect the power
cable before removing or installing any
component. See the table on the right
for more details.