Supero SUPERSERVER 1027TR-TF, User Manual

Page: 75 / 130

5-24
S
UPER
S
ERVER 1027TR-TF/1027TR-TFF/1027TR-TQF User's Manual
Watch Dog Enable/Disable
JWD1 enables the Watch Dog func-
tion, a system monitor that takes action
when a software application freezes
the system. Jumping pins 1-2 will
have Watch Dog reboot the system if a
program freezes. Jumping pins 2-3 will
generate a non-maskable interrupt for
the program that has frozen. See the
table on the right for jumper settings.
Watch Dog must also be enabled in
BIOS.
Note: when Watch Dog is enabled, the user must
write their own application software to disable the
Watch Dog Timer.
Watch Dog
Jumper Settings (JWD1)
Jumper Setting Definition
Pins 1-2 Reset
Pins 2-3 NMI
Open Disabled
BMC Enable
Jumper JPB1 allows you to enable the
onboard BMC (Baseboard Management)
Controller to provide IPMI 2.O/KVM sup-
port on the motherboard. See the table
on the right for jumper settings.
BMC Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 BMC Enable (Default)
Pins 2-3 Normal
IB Enable (X9DRT-IBQF/IBFF Only)
Use Jumper JIB1 to enable or disable the
onboard InfiniBand support on the X9DRT-
IBQF/IBFF. See the table on the right for
jumper settings.
InfiniBand Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 IB Enable (Default)
Pins 2-3 IB Disable
I
2
C Bus to PCI-Exp. Slots
Use Jumpers JI
2
C1 and JI
2
C2 to connect
the System Management Bus (I
2
C) to SMC-
Proprietary Expansion slot to improve system
performance. These two jumpers are to be
set at the same time. The default setting is
Open for normal operation. See the table on
the right for jumper settings.
I
2
C for PCI-E slots
Jumper Settings
Jumper Setting Definition
Closed Enabled
Open Normal (Default)
GLAN Enable/Disable
JPL1 enables or disables the GLAN
1/2 ports on the motherboard. See the
table on the right for jumper settings.
The default setting is Enabled.
GLAN Enable
Jumper Settings
Jumper Setting Definition
1-2 Enabled (default)
2-3 Disabled