Supero SUPERSERVER 1027TR-TF, User Manual

Page: 125 / 130

A-1
Appendix A: BIOS Error Beep Codes
Appendix A
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed each time
the system is powered on, errors may occur.
Non-fatal errors are those which, in most cases, allow the system to continue the
boot-up process. The error messages normally appear on the screen.
Fatal errors are those which will not allow the system to continue the boot-up
procedure. If a fatal error occurs, you should consult with your system manufac-
turer for possible repairs.
A-1 BIOS Error Beep Codes
BIOS Error Beep Codes
Beep Code/LED Error Message Description
1 beep Refresh Ready to boot
5 short beeps + 1 long beep Memory error No memory detected in the system
5 beeps No Con-In or No Con-
Out devices
Con-In: USB or PS/2 keyboard, PCI or
Serial Console Redirection, IPMI KVM
or SOL
Con-Out: Video Controller, PCI or Serial
Console Redirection, IPMI SOL
X9 IPMI Error Codes
1 Continuous Beep System OH System Overheat