Supero SUPERSERVER 1027TR-TF User Manual Download Page 113

Page: 113 / 130

Chapter 7: BIOS

7-23

Note:

During restart, the computer will reboot in order to execute the pend-

ing operation and change the state of the security device.

Current Status Information:

This item displays the information regarding the

current TPM status.

TPM Enable Status

This item displays the status of TPM Support to indicate if TPM is currently
enabled or disabled.

TPM Active Status

This item displays the status of TPM Support to indicate if TPM is currently ac-
tive or deactivated.

TPM Owner Status

This item displays the status of TPM Ownership.



Intel TXT (LT-SX) Configuration

Intel TXT (LT-SX) Hardware Support

This feature indicates if the following hardware components support the Intel
Trusted Execution Technology.

CPU

: TXT (Trusted Execution Technology) Feature

Chipset

: TXT (Trusted Execution Technology) Feature

Intel TXT (LT-SX) Configuration

This feature displays the following TXT configuration setting.

TXT (LT-SX) Support:

This item indicates if the Intel TXT support is enabled

or disabled. The default setting is

Disabled

Intel TXT (LT-SX) Dependencies

This feature displays the features that need to be enabled for the Intel Trusted
Execution Technology to work properly in the system.

Summary of Contents for SUPERSERVER 1027TR-TF



































































































































Search results

Summary of Contents for SUPERSERVER 1027TR-TF

Reviews:

Related manuals for SUPERSERVER 1027TR-TF

Brands by name

Popular brands

Supero SUPERSERVER 1027TR-TF, User Manual

Search results

Summary of Contents for SUPERSERVER 1027TR-TF

Reviews:

Related manuals for SUPERSERVER 1027TR-TF

Brands by name

Popular brands