Supero SuperServer 1027GR-72R2+, User Manual

Page: 10 / 124

1-2
S
UPER
S
ERVER 1027GR-72RT2+/72R2+/TRT2+/TR2+ User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 1027GR-72RT2+/72R2+/TRT2+/TR2+ server is the
X9DRG-HF+II/X9DRG-HFT+II , a dual processor serverboard based on the Intel
C602 chipset. Below are the main features of the X9DRG-HF+II/X9DRG-HFT+II .
(See Figure 1-1 for a block diagram of the chipset).
Processors
The X9DRG-HF+II/X9DRG-HFT+II supports two Intel E5-2600 series processors in
LGA 2011 sockets (Socket R). Please refer to the serverboard description pages on
our web site for a complete listing of supported processors ( www.supermicro.com ).
Memory
The X9DRG-HF+II/X9DRG-HFT+II has 16 DIMM slots that can support up to 512
GB of registered ECC DDR3-1600/1333/1066 MHz RDIMMs or 128 GB of ECC/
non-ECC UDIMMs. Modules of the same size and speed are recommended. See
Chapter 5 for details.
Serial ATA
The serverboard supports a 10-port SATA subsystem, which is RAID 0, 1, 5 and
10 supported. Two of these are SATA 3.0 ports and eight are SATA 2.0 ports. The
SATA drives are hot-swappable units.
PCI Expansion Slots
The X9DRG-HF+II/X9DRG-HFT+II has four PCI-Express 3.0 x16 slots to support
three double-width GPU cards. Additional slots support one PCI-Express 3.0 x8 (in
x16 slot) and one PCI-Express 2.0 x4 (in x8 slot). Note that both CPUs must be
installed for full use of the PCI-E slots.
Onboard Controllers/Ports
The rear I/O ports include a VGA (monitor) port, two USB 2.0 ports, two Gb Eth-
ernet LAN ports (plus two 10 Gb ports on the X9DRG-HFT+II) and one dedicated
IPMI LAN port.
IPMI
IPMI (Intelligent Platform Management Interface) is a hardware-level interface speci-
fi cation that provides remote access, monitoring and administration for Supermicro