Supero SuperServer 1027GR-72R2+ User Manual Download Page 109

Page: 109 / 124

Chapter 7: BIOS

7-23



Intel TXT (LT-SX) Confi guration

Intel TXT (LT-SX) Hardware Support

This feature indicates if the following hardware components support the Intel

Trusted Execution Technology.

CPU

: TXT (Trusted Execution Technology) Feature

Chipset

: TXT (Trusted Execution Technology) Feature

Intel TXT (LT-SX) Confi guration

This feature displays the following TXT confi guration setting.

TXT (LT-SX) Support:

This item indicates if the Intel TXT support is enabled

or disabled.

Intel TXT (LT-SX) Dependencies

This feature displays the features that need to be enabled for the Intel Trusted

Execution Technology to work properly in the system.

VT-d Support

: Intel Virtualization Technology with Direct I/O support

VT Support

: Intel Virtualization Technology support

TPM Support

: Trusted Platform support

TPM State

: Trusted Platform state



ME Subsystem

ME Subsystem Confi guration

This feature displays the following ME Subsystem Confi guration settings.

•

ME BIOS Interface Version

•

ME Version

Summary of Contents for SuperServer 1027GR-72R2+





























































































































Search results

Summary of Contents for SuperServer 1027GR-72R2+

Reviews:

Related manuals for SuperServer 1027GR-72R2+

Brands by name

Popular brands

Supero SuperServer 1027GR-72R2+, User Manual

Search results

Summary of Contents for SuperServer 1027GR-72R2+

Reviews:

Related manuals for SuperServer 1027GR-72R2+

Brands by name

Popular brands