Supero SuperServer 1027GR-72R2+, User Manual

Page: 3 / 124

Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 1027GR-
72RT2+/72R2+/TRT2+/TR2+. Installation and maintenance should be performed
by experienced technicians only.
The SuperServer 1027GR-72RT2+/72R2+/TRT2+/TR2+ is based on the SC-
118GH-R1K66B 1U server chassis and the Super X9DRG-HF+II/X9DRG-HFT+II
serverboard. Please refer to our web site for an up-to-date list of supported operating
systems, processors and memory. See Chapter 1 for a list of differences between
the server models.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X9DRG-HF+II/X9DRG-
HFT+II serverboard and the SC118GH-R1K66B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the system into a rack and
check out the server confi guration prior to powering up the system. If your server
was ordered without the processor and memory components, this chapter will refer
you to the appropriate sections of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the functions
and information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: Standardized Safety Warnings
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
system.
iii
Preface