Supero SuperServer 1026GT-TF, User Manual

Page: 91 / 104

Chapter 7: BIOS
7-23
Supervisor Password
This item indicates if a Supervisor password has been entered for the system. "Not
Installed" means a Supervisor password has not been used.
User Password
This item indicates if a user password has been entered for the system. "Not In-
stalled" means that a user password has not been used.
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then enter a
new Supervisor Password.
User Access Level (Available when Supervisor Password is set as above)
Use this feature to set the user's access level. Select Full Access to grant the
user full read and write access to the Setup Utility. Select View Only to allow the
user to view the Setup Utility displays without making any changes. Select Limited
to allow the user to make changes on limited items such as Date and Time, Select
No Access to prevent the user from entering the Setup Utility.
Change User Password
Select this feature and press <Enter> to enter a new User Password.
Clear User Password (Available only if User Password has been set)
This item allows you to clear a user password after it has been entered.
Password Check
This item allows you to check a password after it has been entered. The options
are Setup and Always.