Supero Supero SUPERSERVER 5018A-MLTN4, User Manual

Page: 28 / 120

3-2
S
UPER
S
ERVER 5018A-MLTN4 User's Manual
3-3 Control Panel LEDs
The control panel located on the front of the SC512L-200B chassis has five LEDs.
These LEDs provide you with critical information related to different parts of the
system. This section explains what each LED indicates when illuminated and any
corrective action you may need to take.
2
1
Overheat/Fan Fail LED
When this LED flashes it indicates a fan failure. When continuously on (not flashing)
it indicates an overheat condition, which may be caused by cables obstructing the
airflow in the system or the ambient room temperature being too warm.
Check the routing of the cables and make sure all fans are present and operating
normally. You should also check to make sure that the chassis covers are installed.
Finally, verify that the heatsinks are installed properly. This LED will remain flashing
or on as long as the overheat condition exists.
NIC2
Indicates network activity on LAN2 when flashing.
NIC1
Indicates network activity on LAN1 when flashing.