Supero Supero SUPERSERVER 5018A-MLTN4, User Manual

Page: 82 / 120

6-8
S
UPER
S
ERVER 5018A-MLTN4 User's Manual
6-7 Power Supply
The SC512 chassis includes a single 200 Watt power supply. This power supply is
auto-switching capable, which enables it to automatically sense and operate at a
100v to 240v input voltage. An amber light will be illuminated on the power supply
when the power is off. An illuminated green light indicates that the power supply
is operating.
Power Supply Failure
In the event that the power supply unit fails, the system will shut down and you will
need to replace the power module.
Replacement units can be ordered directly from Supermicro (see contact information
in the preface) or an authorized reseller.
Replacing the Power Supply
1. Power down the system and disconnect the power cord from the from the
rear of the power supply.
2. Place the chassis on a stable hard surface and remove the chassis cover as
described in Section 6-3.
3. Disconnect the power supply from the motherboard and other chassis compo-
nents.
4. Remove the screws securing the power supply. Two screws are in the back of
the chassis and one is underneath. Retain the screws and the internal brace
that connects the power supply to the chassis from underneath.
5. Pull the power supply out of the chassis.
6. Place the new power supply into the chassis and secure the power supply
using the three screws and internal brace.
7. Connect the power supply to the motherboard and other chassis components.
8. Connect the power cord to the power supply and power up the chassis/server.
9. Once you confirm that the power supply has been installed correctly, replace
the chassis cover.