2-16
S
UPER P4SPA+/P4SPE User's Manual
2-8
Game Port, Parallel Port, Floppy Drive, Hard Drive
and AGP Connections
Use the following information to connect the floppy and hard disk drive
cables.
•
The floppy disk drive cable has seven twisted wires.
•
A red mark on a wire typically designates the location of pin 1.
•
A single floppy disk drive ribbon cable has 34 wires and two connectors to
provide for two floppy disk drives. The connector with twisted wires always
connects to drive A, and the connector that does not have twisted wires
always connects to drive B.
•
The 80-wire ATA100/66 IDE hard disk drive cable that came with your
system has two connectors to support two drives. This special cable
should be used to take advantage of the speed this new technology
offers. The blue connector connects to the onboard IDE connector inter-
face and the other connector(s) to your hard drive(s). Consult the docu-
mentation that came with your disk drive for details on actual jumper
locations and settings for the hard disk drive.
Parallel Port Connector
The parallel port is located on J4.
Refer to Figure 2-3 for location.
See the table on the right for pin
definitions.
Pin Number
Function
1
Strobe-
3
Data Bit 0
5
Data Bit 1
7
Data Bit 2
9
Data Bit 3
11
Data Bit 4
13
Data Bit 5
15
Data Bit 6
17
Data Bit 7
19
ACK
21
BUSY
23
PE
25
SLCT
Pin Number
Function
2
Auto Feed-
4
Error-
6
Init-
8
SLCT IN-
10
GND
12
GND
14
GND
16
GND
18
GND
20
GND
22
GND
24
GND
26
NC
Parallel (Printer) Port Pin Definitions
(J4)
Game Port Header
There is a game port header on
the motherboard See the table on
the right for pin definitions.
Pin Number Function
1
+5V fused
3
GP0 (JSX1R)
5
Ground
7
GP5 (JSBUT1)
9
+5V fused
11
GP2 (JSX2R)
13
GP3 (JSY2R)
15
MIDI-INR
Pin Number Function
2
GP4 (JSBUTO)
4
Ground
6
GP1 (JSY1R)
8
+5V fused
10
GP6 (JSBUT2)
12
MIDI-OUTR
14
GP7 (JSBUT3)
Game Port Header Pin
Definitions
(GAME PORT Header)
