Supero SUPER P4DL6, User Manual

Page: 43 / 92

Chapter 2: Installation
2-17
Chassis/Overheat Fan Select
JP48 allows you to select to use ei-
ther the chassis fan or the overheat
fan. The default position is closed to
select the chassis fan. See the table
on the right for jumper settings.
Jumper
Position
Open
Closed
Definition
Overheat Fan
Chassis Fan
Chassis/Overheat Fan
Select Jumper Settings
(J48)
Fan Detection Select
J58 allows you to select to use ei-
ther the CPU fan or the Chassis
fan. The default position is open to
select the CPU fan. See the table
on the right for jumper settings.
Jumper
Position
Open
Closed
Definition
CPU Fan
Chassis Fan
Fan Detection Select
Jumper Settings (J58)
VGA Enable/Disable
JP56 allows you to enable or dis-
able the VGA port. The default
position is on pins 1 and 2 to en-
able VGA. See the table on the
right for jumper settings.
Jumper
Position
1-2
2-3
Definition
Enabled
Disabled
VGA Enable/Disable
Jumper Settings
(JP56)
SpeakerEnable/Disable
To disable the onboard speaker,
put a jumper on pins 13 and 15 of
JF2•1 on the P4DL6 or remove the
JP2 jumper on the P4DLR+/P4DLR
(see the table on the right for
jumper settings).
Watch Dog Enable
JP3 is used to enable or disable
the Watch Dog function. This
jumper is used together with the
W a t c h D o g e n a b l e f u n c t i o n i n
BIOS. Enable both the jumper and
the BIOS setting to use the Watch
Dog feature. See the table on the
right for pin definitions.
Jumper
Position
Open
Closed
Definition
Disabled
Enabled
W atch Dog Enable
Jumper Settings (JP3)
Jumper
Position
Closed
Open
Definition
Enabled
Disabled
Speaker Enable/Disable
Jumper Settings
(JP2 on DLR+/DLR)