Supero SUPER P4DL6, User Manual

Page: 38 / 92

2-12
S
UPER P4DL6/P4DLR+/P4DLR User’s Manual
HD LED Indicator
The HD LED connector is located
at JF2 on the P4DL6. This LED
i n d i c a t e s a c t i v i t y o n a n y h a r d
drive (IDE, SCSI or CD-ROM).
Speaker
A speaker header is located at
JF2 on the P4DL6. You may dis-
able the onboard speaker by jump-
ing the last two pins of this con-
nection or use all four pins as a
header for an external speaker.
Power LED
The Power LED connection at JF2
on the P4DL6 is used to inform you
that power is being supplied to the
motherboard. The P4DLR+ and
P4DLR have an onboard LED for
this function (see CR5 in Section
2-6).
Third Power Supply Fail
Header
Connect a cable from your power
supply to the JP46 header to pro-
vide warning of power supply fail-
ure. The warning signal is passed
through the PWR_LED pin on JF1
to provide indication of a power
failure on the chassis. Note: This
feature is only available when us-
ing Supermicro power supplies.
See the table on the right for pin
definitions.
T hird Pow er Supply Fail He ader
Pin Definitions (JP46)
Pin
Nu mber
1
2
3
4
Definition
P/S 1 Fail Signal
P/S 2 Fail Signal
P/S 3 Fail Signal
Reset (from MB)