Chapter 4: Award BIOS
4-13
Onboard Serial Port 1
This option allows the user to set the address and the corresponding IRQ
for Serial Port 1. The settings are "Disabled" "3F8/IRQ4", "2F8/IRQ3", "3E8/
IRQ4", "2E8/IRQ3" and "Auto".
Onboard Serial Port 2
This option allows the user to set the address and the corresponding IRQ
for Serial Port 2. The settings are "Disabled" "3F8/IRQ4", "2F8/IRQ3", "3E8/
IRQ4", "2E8/IRQ3" and "Auto".
UART Mode Select
This option allows the user to select the UART mode for BIOS. The settings
are "IrDA", "ASKIR" and "Normal".
RxD, TxD Active
This option allows the user to change the settings for the "RxD, TxD Active"
function. The settings are "Hi, Hi", "Hi, Lo", "Lo, Hi", and "Lo, Lo".
IR Transmission Delay
If "Enabled", the transmssion of IR (infrared) signals will be delayed. The
settings are "Enabled" and "Disabled".
UR2 Duplex Mode
This option sets the UR2 Duplex Mode. The settings are "Full" and "Half".
Use IR Pins
This item sets the mode for Use IR Pins. The settings are "RxD2, TxD2" and
"IR-Rx2Tx2".
Onboard Parallel Port
This option allows the user to set the address and the corresponding IRQ
for the onboard parallel port. The settings are "Disabled", "378/IRQ7", "278/
IRQ5" and "3BC/IRQ7".
