2-8
S
UPER P3TDDR User’s Manual
Reset Button
The Reset connector is located on
pins 3 and 4 of JF1. This connec-
tor attaches to the hardware reset
s w i t c h o n t h e c o m p u t e r c a s e .
See the table on the right for pin
definitions.
Power Button
The PW_ON connector is located
on pins 1 and 2 of JF1. Momen-
t a r i l y c o n t a c t i n g b o t h p i n s w i l l
power on/off the system. The
user can also configure the power
on button to function as a suspend
b u t t o n ( s e e t h e P o w e r B u t t o n
Mode setting in BIOS). To turn off
the power when set to suspend
mode, hold down the power but-
ton for at least 4 seconds. See
the table on the right for pin defini-
tions.
NIC1/2 LED
The NIC1/2 (LAN) LED connectors
are located on pins 9&10/11&12 of
JF1. Attach the NIC LED cable to
the correct pins for each LAN.
See the table on the right for pin
definitions.
Overheat LED
The Overheat LED connector is lo-
cated on pins 7 and 8 of JF1. It
attaches to an LED to to provide
warning of chassis overheating.
See Table 2-6 for pin definitions.
P in
N u m b e r
1
2
D e fin itio n
P W _ O N
G ro u n d
P o w e r B u tto n P in
D e fin itio n s (J F 1 )
P in
N u m b e r
3
4
D e fin itio n
G ro u n d
R e se t
R e s e t B u tto n P in
D e fin itio n s (J F 1 )
P in
N u m b e r
7
8
D e fin itio n
L E D +
L E D -
O ve rh e a t L E D
P in D e fin itio n s (J F 1 )
P in
N u m b e r
9 /1 1
1 0 /1 2
D e fin itio n
L E D +
N IC 1 /2 L E D P in
D e fin itio n s (JF 1 )
L E D -
