Supero SUPER 370SWD, User'S And Bios Manual

Page: 34 / 90

2-4
SUPER 370SWD/370SWT/370SWM
Manual
Installation
Top View of DIMM Socket
Figure 2-2. DIMM Installation
To Install:
Insert
vertically,
press down
until it snaps
into place.
Pay attention
to the two
notches.
To Remove:
Use your thumb to
gently push the
edge of the socket
and release the
module. Do this on
both sides for each
module.
Note: Notches
should align
with the
receptive points
on the socket
D I M M S o c k e t
Side View of DIMM Installation into Socket
DIMM
P C 1 0 0
Notches
P C 1 0 0
Notches
2-4 Installing DIMMs
CAUTION
Exercise extreme care when installing or removing DIMM modules
to prevent any possible damage.
DIMM Installation (See Figure 2-2)
1. Insert DIMMs in Bank 0 through Bank 1 as required for the desired system
memory.
2. Insert each DIMM module vertically into its socket. Pay attention to the
two notches along the bottom of the module to prevent inserting the
DIMM incorrectly.
3. Gently press down on the DIMM module until it snaps into place in the
socket.
4. If installing only a single DIMM, you may use either Bank 0 or 1.