SC512 Chassis Manual
6-6
Installing the Outer Rails to the Rack
Installing the Outer Rails
Attach the short bracket to the outside of the long bracket. You must align the
1.
pins with the slides. Also, both bracket ends must face the same direction.
Adjust both the short and long brackets to the proper distance so that the rail
2.
fits snugly into the rack.
Secure the long bracket to the front side of the outer rail with two M5 screws
3.
and the short bracket to the rear side of the outer rail with three M5 screws.
Use a washer with each screw.
Repeat steps 1-4 for the left outer rail.
4.
Secure to the
Front of the Rack
Secure to the
Rear of the Rack
Figure 6-3: Assembling the Outer Rails
Attach Outer Rack Rails
together
Flat head
M4 x 4 mm
[0.157]
RAIL
Round head
M4 x 4 mm
[0.157]
Flat head
M5 x 12 mm [0.472]
Washer for M5
DVD-ROM CD-ROM FLOPPY DRIVE
Flat head
6-32 x 5 mm
[0.197]
Pan head
6-32 x 5 mm
[0.197]
Round head
3 x 5 mm
[0.197]
Pan head
6-32 x 5 mm
[0.197]
M/B
Flat head
6-32 x 5 mm
[0.197]
HARD DRIVE
Thumb screw
6-32 x 5 mm [0.197]
M/B standoff
6-32 to 6-32
M/B STANDOFF
M/B (CPU) standoff
M5 to 6-32
Round head
2.6 x 5 mm
[0.197]
