2-22
H8QM3-2+/H8QMi-2+ User's Manual
After you have fi nshed, press the <Ctrl> and <X> keys simultaneously. Figure
2-5 shows a list of arrays that have been set up with the utility.
Installing the OS and Drivers
With the Windows OS installation CD in the CD-ROM drive, restart the sys-
tem.
When you see the prompt, hit the <F6> key to enter Windows setup.
A blue screen will appear with a message that begins "Windows could not
determine the type of one or more storage devices . . ." When you see this
screen, hit the <S> key to "Specify Additional Device", then insert the driver
diskette you just created into the fl oppy drive.
Highlight "Manufuacturer Supplied Hardware Support Disk" and hit the <En-
ter> key.
Highlight the fi rst "nVidia RAID" driver shown and press the <Enter> key to
install it.
Soon a similar blue screen will appear again. Again hit the <S> key, then
highlight the second item, "nForce Storage Controller" and press the <Enter>
key, then <Enter> again to continue with the Windows setup.
4.
1.
2.
3.
4.
5.
6.
