Supero H8DGU, User Manual

Page: 58 / 72

4-10
H8DGU-F Serverboard User’s Manual
Redirection After BIOS POST
Options are Disable (no redirection after BIOS POST), Boot Loader (redirection
during POST and during boot loader) and Always (redirection always active). Note
that some OS's may not work with this set to Always.
Terminal Type
Selects the type of the target terminal. Options are ANSI , VT100 and VT-UTF8.
VT-UTF8 Combo Key Support
Allows you to Enable or Disable VT-UTF8 combination key support for ANSI/VT100
terminals.
Sredir Memory Display Delay
Use this setting to set the delay in seconds to display memory information. Options
are No Delay , 1 sec, 2 secs and 4 secs.
Hardware Health Confi guration
CPU Overheat Alarm
This setting allows you to specify the type of alarm for CPU overheating. Options
include The Early Alarm and The Default Alarm .
Fan Speed Control
This feature allows the user to determine how the system will control the speed of
the onboard fans. The options are Full Speed/FS (Max Cooling), Performance/PF
(Better Cooling), Balanced/BL (Balance between performance and energy saving),
Energy Saving/ES (Lower Power and Noise).
Other items in the submenu are systems monitor displays for the following infor-
mation:
CPU Temperature, CPU1 Temperature, CPU2 Temperature, NB Temperature,
VRD1 Temperature, VRD2 Temperature, System Temperature, Air Temperature,
Fan 1-8 Reading, CPU1 VCore, CPU2 VCore, CPU1 Mem VTT, CPU2 Mem
VTT, CPU1 Mem, CPU2 Mem, 1.1V, 1.8V, 5V +12V, -12V, 3.3 Vcc, 3.3 VSB,
VBAT and HT Voltage.