Supero H8DGU, User Manual

Page: 51 / 72

Chapter 4: BIOS
4-3
Wait for F1 if Error
This setting controls the system response when an error is detected during the
boot sequence. When enabled, BIOS will stop the boot sequence when an error is
detected, at which point you will need to press the F1 button to re-enter the BIOS
setup menu. The options are Enabled and Disabled.
Hit 'DEL' Message Display
Use this option to Enable or Disable the "Press DEL to run setup" message in
POST.
Watch Dog Function
Allows system to restart when system is inactive more than 5-minutes. The options
are Enabled and Disabled .
Power Button Function
This sets the function of the power button when you turn off the system. Options
include 4-second Overide and Instant Off .
Restore on AC Power Loss
This sets the action that occurs when an AC power loss occurs. Options include
Power Off, Power On and Last State .
Interrupt 19 Capture
Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled and
Disabled.
EUP Support
This setting allows you to enable or disable supplied standby power in S5. Set to
Enabled to for EUP requirements and set to Disabled for wakening capability.
Processor and Clock Options
CPU Confi guration
This displays static information on the Module Version, Physical Count and Logical
Count for the system's processor(s) and clock.
CPU Information
The information for the installed processor includes Revision, Cache L1/L2/L3,
Speed, NB CLK, Able to Change Frequency and uCode Patch Level.