Supero FatTwin F617R2-F73, User Manual, Page: 71 / 144

Chapter 5: Advanced Motherboard Setup
5-17
Universal Serial Bus (USB)
Two Universal Serial Bus ports (USB1,
USB2) are located at (JUSB1, JUSB2)
the I/O back panel. (USB Cables are not
included). See the table on the right for
pin defi nitions.
Backplane USB 0/1
& FP USB 2
Pin Defi nitions
Pin# Defi nition
1 +5V
2 PO-
3 PO+
4 Ground
5 NA
Video Connector
A Video (VGA) port is located next to
JUSB1 on the I/O backplane. Refer to
the board layout below for the location.
Ethernet LAN Ports
Two Gigabit Ethernet ports (LAN1,
LAN2) are located on the I/O backplane
on the motherboard. In addition, an IPMI
LAN is also on the backplane. All these
ports accept RJ45 type cables. Please
refer to the LED Indicator Section for
LAN LED information.
LAN Ports (LAN1/2)
Pin Defi nition
Pin# Defi nition Pin# Defi nition
1 P2V5SB 10 SGND
2 TD0+ 11 Act LED
3 TD0- 12 P3V3SB
4 TD1+ 13 Link 100 LED
(Yellow, +3V3SB)
5 TD1- 14 Link 1000 LED
(Yellow, +3V3SB)
6 TD2+ 15 Ground
7 TD2- 16 Ground
8 TD3+ 17 Ground
9 TD3- 18 Ground
NC indicates no connection.
Serial Ports
A COM connection (COM1) is located
next to the Front Control Panel (JF1) on
the motherboard. See the table on the
right for pin defi nitions.
Serial Port Pin Defi nitions
(COM1)
Pin # Defi nition Pin # Defi nition
1 DCD 6 DSR
2 RXD 7 RTS
3 TXD 8 CTS
4 DTR 9 RI
5 Ground 10 NC
NC indicates no connection.