Supero FatTwin F617R2-F73, User Manual

Page: 12 / 144

1-2
FatTwin F617R2-FT/F73 USER'S MANUAL
1-2 Serverboard Features
A t t h e h e a r t o f t h e F a t T w i n F 6 1 7 R 2 - F T / F 7 3 l i e s t h e
X 9 D R F F ( - 7 ) , a d u a l p r o c e s s o r s e r v e r b o a r d b a s e d o n t h e I n t e l ®
C602J chipset and designed to provide maximum performance. Eight of these
serverboards can be mounted in the SCF418IL-R1K62B chassis.
The sections below cover the main features of the X9DRFF(-7) serverboard (see
Figure 1-1 for a block diagram of the chipset).
Processors
The X9DRFF(-7) supports single or dual Intel® Xeon® E5-2600 series processors
(Socket R LGA 2011). Each processor supports four full-width Intel QuickPath
Interconnect (QPI) links, with support of up to 25.6 GT/s per QPI link and with
Data Transfer Rate of up to 8.0 GT/s per direction. Please refer to the serverboard
description pages on our web site for a complete listing of supported processors
( www.supermicro.com ).
Memory
Each X9DRFF(-7) serverboard node has eight (8) DIMM slots supporting up to
256 GB of DDR3-1600/1333/1066/800 MHz speed RDIMM/LDIMM registered
ECC or 64 GB of DDR3-1600/1333/1066/800 MHz speed UDIMM SDRAM in up
to 1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB sizes at 1.35V or 1.5V voltages. See
Chapter 5 for details.
Note: For the latest CPU/memory updates, please refer to our website at
http://www.supermicro.com/products/motherboard .
Serial ATA
A Serial ATA controller is integrated into the C602J to provide up to a six-port
SATA subsystem, (two SATA 3 (6 Gb/s) and four SATA 2 (3 Gb/s)) which is either
RAID 0, 1, 5 and 10 (AHCI SATA2) or RAID 0 and 1 (AHCI SATA3) supported. The
SATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.