Supero FatTwin F617R2-F73, User Manual, Page: 141 / 144

B-1
Appendix B: System Specifi cations
Appendix B
System Specifi cations
Note: Unless noted specifi cations apply to a complete system (all serverboards).
There are eight motherboard drawer nodes per system.
Processors
Two E5-2600 series processors per node in Socket R LGA 2011 type sockets
Note: please refer to our website for details on supported processors.
Chipset
One C602J chipset per node
BIOS
16 MB AMI BIOS® Flash EEPROM per node
Memory Capacity
The X9DRFF(-7) has eight (8) DIMM slots supporting up to 256 GB of
DDR3-1600/1333/1066/800 MHz speed RDIMM/LDIMM registered ECC or
64 GB of DDR3-1600/1333/1066/800 MHz speed UDIMM SDRAM in up to
1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB sizes at 1.35V or 1.5V voltages per
node.
Note: refer to Section 5-5 for details on installation.
Note: Check the Supermicro website ( www.supermicro.com ) for the latest memory support
information.
SAS/SATA Drive Bays
Each node of the FatTwin F617R2-FT/F73 contains two (2) hot-swap drive bays
to house up to two (2) standard SAS/SATA drives per node.
PCI Expansion
The FatTwin F617R2-FT/F73 has 1x PCI-E 3.0 x16 low-profi le available per
node.
Serverboard
X9DRFF(-7) serverboard (proprietary form factor)
Dimensions: (LxW) 19.92" x 8.54" (505.97 mm x 216.92 mm)