Supero 8047R-7JRFT, User Manual

Page: 81 / 140

Chapter 5: Advanced Serverboard Setup
5-29
GLAN Enable/Disable
Use JPL1 to enable GLAN Port1/Port2
on X9QRi-F. Use JPTG1 to enable
10G_LAN Ports 1/2 on the X9QR7-TF/
JTF. These two jumpers share the same
component. See the table on the right
for jumper settings. The default setting
is Enabled.
GLAN Enable (JPL1/JPTG1)
Jumper Settings
Jumper Setting De fi nition
1-2 Enabled (default)
2-3 Disabled
VGA Enable
Jumper JPG1 allows the user to enable
the onboard VGA connectors. The
default setting is 1-2 to enable the
connection. See the table on the right
for jumper settings.
VGA Enable (JPG1)
Jumper Settings
Jumper Setting De fi nition
1-2 Enabled (Default)
2-3 Disabled
BMC Enable
Jumper JPB1 allows you to enable the
onboard BMC (Baseboard Management)
Controller to provide IPMI 2.O/KVM
support on the serverboard. See the
table on the right for jumper settings.
BMC Enable (JPB1)
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 BMC Enable (Default)
Pins 2-3 Normal
SAS Enable
JPS1 enables/disables L-SAS 0~3/4~7
support located at JS14/JS15; while
JPS3 enables/disables L-SASA 0~3/4~7
connections located at JS1/JS2. See the
table on the right for jumper settings. The
default setting is enabled.
SAS Support Enable (JPS1/JPS3)
Jumper Settings
Jumper Setting De fi nition
Pins 1/2 SAS Enabled (Default)
Pins 2/3 SAS Disabled
TPM Enable
Jumper JPT1 allows the user to enable
the onboard TPM Chip U437 for TPM
(Trusted Platform Module) support to
enhance data security. See the table on
the right for jumper settings.
TPM Enable (JPT1)
Jumper Settings
Jumper Setting De fi nition
1-2 Enabled (Default)
2-3 Disabled