Supero 8047R-7JRFT, User Manual

Page: 56 / 140

5-4
SUPERSERVER 8047R-7JRFT USER'S MANUAL
Connecting the Control Panel
JF1 contains header pins for various front control panel connectors. See Figure 5-1
for the pin locations of the various front control panel buttons and LED indicators.
Even and odd numbered pins are on opposite sides of each header.
All JF1 wires have been bundled into single keyed ribbon cable to simplify their
connection. The red wire in the ribbon cable plugs into pin 1 of JF1. Connect the
other end of the cable to the Control Panel printed circuit board, located just behind
the system status LEDs in the chassis.
See the Connector De fi nitions section in this chapter for details and pin descriptions
of JF1.
Figure 5-2. Front Control Panel Header Pins (JF1)
NMI
x (key)
3.3 V
ID_UID_SW/3/3V Stby
NIC1 Activity LED
NIC2 Activity LED
Red+ (Blue LED Cathode)
3.3V
Reset Button
Power Button
Ground
x (key)
FP Power LED
HDD LED
NIC1 Activity LED
NIC2 Activity LED
Blue + [OH/Fan Fail/PWR Fail/UID LED]
Power Fail LED
Ground
Ground
2 1
20 19