manualshive.com logo in svg

Supero 8047R-7JRFT, User Manual

Share
Download
Supero 8047R-7JRFT User Manual Download Page 11

Chapter 1 

Introduction

1-1 Overview

The SuperServer 8047R-7JRFT is a high-end server comprised of two main 
subsystems: the SC848E16-R1K62B 4U server chassis and the X9QR7-TF-JBOD 
quad processor serverboard. Please refer to our web site for information on operating 
systems that have been certi

fi

 ed for use with the system (

www.supermicro.com

).

In addition to the serverboard and chassis, various hardware components have been 
included with the SuperServer 8047R-7JRFT server, as listed below:

• 

Four 2U passive narrow ILM CPU heatsinks (SNK-P0048PS)

• 

One Mylar air shroud (MCP-310-84805-0B)

• 

Four 92x92x38-mm, 7.5K RPM, PWM fans (FAN-0115L4)

• 

One 80x80x38-mm, 7K RPM, PWM Chassis Rear Fan (FAN-0126L4)

• 

One 80x80x38mm, 7K RPM Chassis Fan (FAN-0128L4)

• 

SATA Backplane
One Backplane for twenty-four (24) 3.5" HDD (BPN-SAS2-846EL1)
Twenty-four hot-swap 3.5" HDD trays (MCP-220-00075-0B)
One 39-cm PBF IPASS TO IPASS cable (CBL-0108L-02)
One 55-cm PBF IPASS TO IPASS cable (CBL-0421L)

• 

Optional: One 4U Rail set (MCP-290-00057-0N)

• 

Optional: Two Rear Fan Kit (MCP-320-0046-0N-KIT)

Note:

 a complete list of safety warnings is provided on the Supermicro web site at 

http://www.supermicro.com/about/policies/safety_information.cfm

Chapter 1: Introduction

1-1

Summary of Contents for 8047R-7JRFT













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands