Supero 8047R-7JRFT, User Manual

Page: 116 / 140

7-16
SUPERSERVER 8047R-7JRFT USER'S MANUAL
SATA Mode
Use this feature to con fi gure SATA mode for a selected SATA port. The options are
Disabled, IDE Mode,
AHCI Mode
and RAID Mode. The following are displayed
depending on your selection:
IDE Mode
The following items are displayed when IDE Mode is selected:
Serial-ATA (SATA) Controller 0~1
Use this feature to activate or deactivate the SATA controller, and set the
compatibility mode. The options are Disabled, Enhanced, and Compatible.
The default for SATA Controller 0 is
Compatible.
The default of SATA Con-
troller 1 is
Enhanced
.
AHCI Mode
The following items are displayed when the AHCI Mode is selected.
Aggressive Link Power Management
When Enabled, the SATA AHCI controller manages the power usage of
the SATA link. The controller will put the link in a low power mode during
extended periods of I/O inactivity, and will return the link to an active state
when I/O activity resumes. The options are
Enabled
and Disabled.
Port 0~9 Hot Plu
g
Select Enabled to enable hot-plug support for a particular port, which will
allow the user to change a hardware component or device without shutting
down the system. The options are
Enabled
and Disabled.
Staggered Spin Up
Select Enabled to enable Staggered Spin-up support to prevent excessive
power consumption caused by multiple HDDs spinning-up simultaneously.
The options are Enabled and
Disabled
.
RAID Mode
The following items are displayed when RAID Mode is selected:
Port 0~9 Hot Plug
Select Enabled to enable hot-plug support for the particular port. The options
are
Enabled
and Disabled.