Supero 5037MR User Manual Download

Page: 75 / 106

Chapter 7: BIOS

4-3

System Overview:

The following BIOS information will be displayed:

System Time/System Date

Use this option to change the system time and date. Highlight

System Time

Sys-

tem Date

using the arrow keys. Enter new values through the keyboard. Press the

<Tab> key or the arrow keys to move between

elds. The date must be entered in

Day MM/DD/YY format. The time is entered in HH:MM:SS format. (

Note:

The time

is in the 24-hour format. For example, 5:30 P.M. appears as 17:30:00.)

Supermicro X9SRD-F

Version: This item displays the version of the BIOS used in the system.

Build Date: This item displays the day this version of BIOS was built.

Memory Information

Total Memory

This displays the size of memory available in the system:

Summary of Contents for 5037MR











































































































Search results

Summary of Contents for 5037MR

Reviews:

Related manuals for 5037MR

Brands by name

Popular brands

Supero 5037MR, User Manual

Search results

Summary of Contents for 5037MR

Reviews:

Related manuals for 5037MR

Brands by name

Popular brands