Supero 5037MR, User Manual

Page: 36 / 106

5-2
S
UPER
S
ERVER 5037MR-H8TRF User's Manual
Unpacking
The motherboard is shipped in antistatic packaging to avoid electrical static dis-
charge. When unpacking the board, make sure the person handling it is static
protected.
5-2 Motherboard Installation
The X9SRD-F motherboards have been preinstalled into carriers to simplify install-
ing and removing the nodes from the SC938H-R1620B chassis. The motherboards
should remain in these carriers at all times. If a failed node needs to be returned
for repair or replacement, the motherboard is to be shipped assebled in its carrier
and not by itself. See Chapter 6 for instructions on installing and removing the
motherboard nodes from the chassis.
5-3 Connecting Cables
The 5037MR-H8TRF server was designed as a cableless system. As a result, all
power and data connections to the motherboard nodes are made whenever a node
is installed into its bay in the chassis. This covers the main power connection, the
control panel connections and the data and power connections for the SATA drives.
5-4 I/O Ports
The I/O ports are located at the back of the motherboard node. See Figure 5-1
below for the colors and locations of the various I/O ports.
Figure 5-1. I/O Ports
I/O Ports
1 KVM Port 3 UID Button
2 IPMI Port 4 Power Button and LED
1
4
3
2