Supero 5028R-E1CR12L, User Manual

Page: 62 / 134

5-16
S
UPER
S
TORAGE
S
YSTEM 5028R-E1CR12L User's Manual
Unit Identifier Switch/UID LED
Indicators
A Unit Identifier (UID) switch and an LED
indicator are provided on the mother-
board. The UID switch is located next to
the VGA port on the backplanel The rear
UID LED (LE1) is located next to the UID
switch. When you press the UID switch,
the UID LED indicator will turn on. Press
the UID switch again to turn off the LED
indicator. The UID indicator provides easy
identification of a system unit that may be
in need of service.
Note:
UID can also be triggered via IPMI
on the motherboard. For more information
on IPMI, please refer to the IPMI User's
Guide posted on our website at http://
www.supermicro.com.
UID Switch
Pin# Definition
1 Ground
2 Ground
3 Button In
4 Ground
UID LED (LED3)
Status
Color/State Status
Blue: On Unit Identified
Universal Serial Bus (USB)
Four Universal Serial Bus ports (USB 0/1,
2/3) are located on the rear I/O panel. Ad-
ditional USB headers provide four front-
accessible USB connections (USB 4/5,
6/7, 8/9). One Type A connector (USB10)
also supports front panel USB connection
(cables are not included). See the tables
on the right for pin definitions.
Back Panel USB (2.0) #0/1
Pin Definitions
Pin# Definition Pin# Definition
1 +5V 5 +5V
2 USB_PN0 6 USB_PN1
3 USB_PP0 7 USB_PP1
4 Ground 8 Ground
Front Panel USB (2.0) #4/5, 6/7, 8/9
Pin Definitions
Pin # Definition Pin # Definition
1 +5V 2 +5V
3 USB_PN2 4 USB_PN3
5 USB_PP2 6 USB_PP3
7 Ground 8 Ground
9 Key 10 NC
USB (3.0) USB#11
Pin Definitions
Pin # Definition Pin # Definition
1 VBUS 2 SSRX-
3 SSRX+ 4 Ground
5 SSTX- 6 SSTX+
7 SSTX+ 8 D-
9 D+ 10
NC = No Connection