Supero 5028R-E1CR12L, User Manual

Page: 10 / 134

1-2
S
UPER
S
TORAGE
S
YSTEM 5028R-E1CR12L User's Manual
1-2 Motherboard Features
The 5028R-E1CR12L is built around the X10SRH-CLN4F, a single processor moth-
erboard based on Intel's C612 Express chipset. Below are the main features of the
X10SRH-CLN4F (see Figure 1-1 for a block diagram of the chipset).
Processors
The X10SRH-CLN4F supports an Intel ® E5-2600 v3 processor in an LGA 2011
socket (R3 Socket). Please refer to the motherboard description pages on our web
site for a complete listing of supported processors.
Memory
The X10SRH-CLN4F has eight DIMM sockets that can support up to 256 GB of
RDIMM (registered DIMM) or 512 GB of load-reduced DIMMs (LRDIMMs) DDR4-
1866/1600/1333/1066/800 DDR3 memory. Please refer to Chapter 5 for installing
memory.
SATA
An on-chip SATA controller is integrated into the X10SRH-CLN4F to provide ten
SATA 3.0 ports, which are RAID 0, 1 and 10 supported. The SATA drives are
hot-swappable units.
SAS
SAS is provided by a built-in LSI 3008 SAS controller, which supports eight SAS
3.0 connections. RAID 0, 1 and 10 are supported.
I/O Ports
The rear I/O ports include one COM port, a VGA (monitor) port, two USB 3.0 ports,
two USB 2.0 ports and four gigabit Ethernet ports. A dedicated IPMI LAN port is
also included.
PCI Expansion Slots
The X10SRH-CLN4F features one PCI-Express 2.0 x2 (in a x4 slot), one PCI-
Express 2.0 x4 (in a x8 slot), one PCI-Express 3.0 x4 (in a x8 slot), one PCI-Express
3.0 x8 (in a x16 slot), and two PCI-Express 3.0 x8 slots.