Supero 4021A-T2, User Manual

Page: 86 / 104

7-14
A+ Workstation 4021A-T2 User's Manual
Hardware Monitor
CPU Overheat Alarm
Use the "+" and "-" keys to set the CPU temperature threshold to between 65
o
and
90
o
C. When this threshold is exceeded, the overheat LED on the chassis will light up
and an alarm will sound. The LED and alarm will turn off once the CPU temperature
has dropped to 5 degrees below the threshold set. The default setting is 72
o
C .
System Fan Monitor
Fan Speed Control
This feature allows the user to determine how the system will control the speed of the
onboard fans. Select "Workstation" if your system is used as a Workstation. Select
"Server" if your system is used as a Server. Select "Disable" to disable the fan speed
control function to allow the onboard fans to continuously run at full speed (12V).
The options are 1) Disable (Full Speed), 2) 3-pin (Server), 3) 3-pin (Workstation),
4) 4-pin (Server), 5) 4-pin (Workstation, 6) Quiet and 7) Super Quiet.
Other items in the submenu are systems monitor displays for the following infor-
mation:
CPU1 Temperature, CPU2 Temperature (for 2U systems), System Temperature,
VCoreA, VCoreB (for 2U systems), HT Voltage, CPU1 Mem VTT, CPU2 Mem VTT,
CPU1 Mem, CPU2 Mem, VDD, 1.5V, MCP55 VCcore, 3.3V, 12V, -12V, 5V VSB
and VBAT.