Supero 4021A-T2, User Manual

Page: 23 / 104

Chapter 2: Installation
2-9
Figure 2-5. Accessing the Inside of the System
(Rack Confi guration shown)
top/left chassis cover. The SATA disk drives can be installed and removed
from the front of the chassis without removing any chassis covers.
To install components into the 5.25" drive bays, you must fi rst remove the
top/left chassis cover as described in the previous section. Refer to Chapter 6
for details.
Refer to Chapter 6 if you need to reinstall a CD-ROM and/or fl oppy disk drive
to the system.
Depending upon your system's confi guration, there may be one or more
drives already installed. If you need to install SATA drives, please refer to
Chapter 6.
Checking the Airfl ow
Airfl ow is provided by four hot-swap 8-cm chassis fans working in conjunction
with an air shroud. Two 8-cm exhaust fans are also mounted at the rear of
the chassis. The system component layout was carefully designed to promote
suffi cient airfl ow through the chassis.
Note that all power and data cables have been routed in such a way that they
do not block the airfl ow generated by the fans. Keep this in mind when you
reroute them after working on the system.
2.
3.
4.
1.
2.