Supero 4021A-T2, User Manual

Page: 39 / 104

Chapter 5: Advanced Serverboard Setup
5-7
5-5 I/O Ports
The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-3 below for the colors and locations of the various I/O ports.
Figure 5-3. Rear Panel I/O Ports
5-6 Installing Memory
CAUTION
Exercise extreme care when installing or removing memory modules
to prevent any possible damage.
Insert each memory module vertically into its slot, paying attention to the
notch along the bottom of the module to prevent inserting the module incor-
rectly (see Figure 5-4). See support information below.
Gently press down on the memory module until it snaps into place.
Note: each processor has its own built-in memory controller, so the CPU2 DIMMs
cannot be addressed if only a single CPU is installed in the CPU1 socket. 128 MB,
256 MB, 512 MB, 1 GB, 2 GB, 4 GB and 8 GB memory modules are supported.
It is highly recommended that you remove the power cord from the system before
installing or changing any memory modules.
1.
2.