Supero 2027R-WRF, User Manual

Page: 65 / 132

Chapter 5: Advanced Serverboard Setup
5-13
5-6 Adding PCI Expansion Cards
PCI Expansion Slots
One riser card is used to support PCI expansion cards in the system. The riser
card can support one UIO card and three full-height, full-length PCI-Express x8
expansion cards.
Installing a PCI Add-on Card
1. Remove the chassis cover.
2. Release the locking tab that corresponds to the PCI slot shield for the slot
you wish to populate.
3. Insert the expansion card into the riser card, pushing down with your thumbs
evenly on both sides of the card.
4. Slide the add-on card into the riser card and attach the add-on card bracket
in place of the PCI slot shield.
5. Secure the add-on card by closing the PCI slot shield lever.
6. Connect cables to the add-on card as necessary.
Note:
If the left side riser card has 2 or more x8 PCI-E slots installed, then make
sure the cards on the riser card are detected by your system. If it is not, then
go to the system’s BIOS Setup and in Advanced/ PCI/PnP Con
fi guration /SXB1
Con fi guration BIOS setting select the [2x8] option. Then save the BIOS setting
changes and reboot the system.